Home>How to Repair Scratches on Solid Wood Sports Flooring

How to Repair Scratches on Solid Wood Sports Flooring

Edit: Denny 2020-03-26

Solid wood flooring, because of its natural properties, has been loved by many stadiums and host parties. If we accidentally leave scratches on the floor of solid wood sports, what should we do?



Today, I will bring you the repair method of popular science solid wood solid wood sports floor scratches:

1.Clean the floor completely

Clean up the scratched floor. The lack of gloss of the solid wood sports floor can only make the scratches or wear look more obvious.

Mop or vacuum cleaner for dust, debris, clean hair, and spray water on the floor at home, then mix with a special floor cleaner.

2.Use solid wood floor care products

Solid wood sports floor repair agent can help restore the beauty and gloss of hard solid wood sports flooring, and we don't need sanding or polishing.

Tips for dealing with scratches on solid wood floors

1) Walnuts can be used to correct scratches and wear on solid wood mobile floors. Because walnuts contain high-quality natural brown lubricants and fuels, slowly apply the area covered with the walnut oil worn on your fingers, let the oil stand for a few minutes, and then polish it with a cloth.

2) The use of coconut oil can also reduce the scratches on the solid wood floor to a certain extent. Use a small brush to apply a thin layer of coconut oil to the damaged part of the solid wood floor. Wait for a period of time without using a soft wipe.

3) The combination of baking soda and olive oil can also help companies reduce and eliminate scratches on solid wood as a sports raised floor. First, clean the floor with a vacuum cleaner, and then apply some olive oil to the scratched area with baking soda. After five minutes, you can gently wipe it off with a soft sponge. Finally, clean the data with a damp cloth and dry it with a towel.

4) Renovate or replace the floor by professionals

If the wood sports floor has been relatively severely scratched, you can choose to use 400-grit sandpaper dipped in soapy water and wipe it clean. Wait for it to dry, then analyze the partial color, and apply a layer of paint on its research surface. After 24 hours, polish it with 400 grit sandpaper, and finally apply the floor wax polishing technique.